Terms of Reference

 Supplier for Portable latrine

Oxfam Lebanon Programme

Oxfam is a global movement of people, working together to end the injustice of poverty. Oxfam has been working in Lebanon since 1993. We provide humanitarian assistance to vulnerable people affected by conflict, and we promote economic justice and good governance, and women’s rights. Oxfam also works with local partners to contribute to the protection and empowerment of marginalized women and men.

 

Project Objective:

Under south emergency response, Oxfam is seeking a company to sign with it a framework agreement to provide and install chemical and non-chemical portable latrines. Location of the delivery will be based on the emergency, the tentative locations are Beirut (Meten areas), Baalback district and Nabatieh (specific location will be shared with winner supplier).

The selected supplier will be responsible for delivering, installing, and ensuring the operational readiness of the portable latrines across the designated locations. This will involve coordination with Oxfam’s project team to meet the required standards and timelines.

 

Content of Works:

Chemical latrines:

  • Body: High density polyethylene (HDPE) plastic., 
  • Base: Reinforced HDPE base. (Raised base)
  • Dimensions:
    External Size: Minimum of 100 cm (width) x 100 cm (depth) x 220 cm (height)
  • Design Features:
    Surface: Smooth and easy to clean interior and exterior surfaces with no sharp edges.
    Handles: Widened and ergonomically designed handles for easy transport and relocation.
    Ventilation: Adequate ventilation system to minimize odors, with a high-mounted vent pipe
    Doors: Equipped with two steel pins for secure hanging / Strong door springs for secure closure / Lockable from the inside for privacy and security.
  • Accessories:.
    Lamp: LED battery operated, or solar-powered light installed inside.
    Mirror: Shatterproof mirror mounted on the interior wall.
    Toilet Seat: Comfortable seat with a lid that seals to minimize odors when not in use.
    Toilet Paper Holder: Integrated for toilet paper.
  • Waste Holding Tank:
    Capacity: Minimum of 250 litres
    Construction: Leak-proof design with a heavy-duty seal to prevent spillage and odors.
    Drainage: Accessible drainage outlet with a secure cap for easy emptying and cleaning.
  • Features:
    Stainless steel hand wash basin included inside the unit, connected to an external water source.

Non chemical:

General Requirements:

  • Dimensions: Minimum external size of 100 cm (width) x 100 cm (depth) x 220 cm (height).

 

Type 1: Non-Chemical Steel Latrine

Material and Construction:

  • Structure: Steel frame construction with walls and roof made of sandwich panels or other heavy-duty materials.
  • Panels: Sandwich panels should be insulated, weather-resistant, and provide sufficient thermal protection.
  • Flooring: Base floor made of galvanized steel with a bottom tank for black water. The flooring should be slip-resistant.
  • Door: Insulated steel door, 80 cm width, with a robust locking mechanism, and adequate sealing to prevent odor leakage.

Sanitary Features:

  • Toilet Seat:

Option 1: Arabic (squat) seat.

Option 2: Western (sitting) seat.

Both options should be securely fixed to the base and include all necessary connections.

  • Waste Collection Tank:

Material: Galvanized steel

Capacity: Minimum 250 liters

Design: Serves as the base floor with a necessary slope for efficient drainage.
Drainage Valve: 4-inch main drainage valve with all required fittings to connect to the nearest wastewater network if applicable.

Ventilation and Lighting:

  • Ventilation: Adequate ventilation system, including vents to allow air circulation and minimize odors.
  • Lighting: Integrated lighting (battery-operated or solar-powered) to ensure visibility during night-time use.

     

External Features:

  • Wash Basin: One PVC wash basin mounted outside the unit, connected to the bottom tank for wastewater drainage. Includes a water tap and all necessary connections.
  • Soap Dispenser: Installed outside next to the sink, durable and easy to refill.
  • Mirror: Shatterproof mirror mounted on the exterior wall next to the wash basin.

Installation:

  • Foundation: The unit must be installed on a steel frame base provided by the supplier. The base should be designed to withstand the weight and usage of the latrine.
  • Connections: Supplier is responsible for all mechanical piping (PPR) and related fittings to be installed, serving both the inside toilet and the outside sink.

 

Type 2: Non-Chemical HDPE Latrine

 

Material and Construction:

 

  • Structure: Made of high-density polyethylene (HDPE) plastic, ensuring durability, impact resistance, and weather protection.
  • Flooring: Slip-resistant HDPE flooring with a sloped design for efficient drainage.
  • Door: HDPE door with a secure locking mechanism, designed for easy access and safe closure.

 

Sanitary Features:

  • Toilet Seat:

Option 1: Arabic (squat) seat

Option 2: Western (sitting) seat

Both options should be fully plumbed for easy connection to the waste outlet.

 

  • Waste Management:

The latrine should be fully plumbed to connect to a waste outlet.

Easy-connect waste outlet with a secure seal to prevent leakage and odors.

 

Ventilation and Lighting:

  • Ventilation: Integrated vent system to allow air circulation and odor control.
  • Lighting: Built-in battery-operated or solar-powered light for internal illumination.

 Features:

  • Hand Wash Basin: Stainless steel hand wash basin included inside the unit, connected to an external water source.
  • Mirror: Shatterproof mirror mounted inside the unit.
  • Soap Dispenser: Durable and easy-to-refill dispenser inside the unit.

Installation:

  • The supplier must ensure that all connections are made securely, and that the unit is ready for use upon installation.
  • Installation on a stable surface, with all necessary fixtures and fittings included.

 

Provide 500 L Water tank and steel base:

The tank shall be installed on the steel base with capacity of 500 liters per tank.

Dimension of steel base: 80 cm x 80 cm x 120 h

Made of steel hollow bar size 5 x 2.5 cm, hollow bar 2.5 x 2.5 cm, draft design attached.

Include all necessary connections from the tank to the hand wash basin.

 

Table of items.

Supplier to provide unit cost of one item. Oxfam will request based on the needs.

#

Description

location

UNIT

QUANTITY

UNIT PRICE (USD)

TOTAL PRICE (USD)

1

Chemical latrine 

Beirut

Latrine

50

 

 

 

Zahle

Latrine

50

 

 

Nabateih (Iklim Tofah)

Latrine

50

 

 

2

Non chemical latrine (Type 1)

Beirut

Latrine

50

 

 

 

Zahle

Latrine

50

 

 

Nabateih (Iklim Tofah)

Latrine

50

 

 

3

 

Non chemical latrine (Type 2)

Beirut

Latrine

50

 

 

Zahle

Latrine

50

 

 

Nabateih (Iklim Tofah)

Latrine

50

 

 

4

Water tank

Beirut

Tank

100

 

 

 

 

Zahle

Tank

100

 

 

 

 

Nabateih (Iklim Tofah)

Tank

100

 

 

Total

 

 VAT 11% (if applicable)

 

 Total After Tax

 

Requested Documents

  • Company registration documents 
  • Copy of the ID of the representative/owner of the company.
  • Ministry of Finance registration certificate and VAT if applicable.
  • Proof of experience, the bidder must make available a minimum of Three reference projects.
  • Full Specifications/Technical Details/Datasheet of all the items/equipment.
  • Warranty Details   
  • Delivery time
  • The bidder should include costs for transportation.
  • Bidder shall provide completed priced Bill of Quantities (BOQ). The unit prices and rates must be presented in US dollars for each of the offer item.
  • Oxfam has the right to increase or decrease quantities at the same unit cost
  • Oxfam has the right to select different suppliers for the same market and the quantity might be split between them.
  • The quantity of items requested will differ based on the needs which will be defined later for emergency response. 

 

NB: This purchase is made for emergency situations

 

Date of delivery: One week after signing the agreement.

 

File must be submitted to [email protected]  before the 17th  of October 2024.

 

Questions / Request for clarification

Any requests for clarification may be submitted by email to  [email protected]

 

Timeframe and Payment: 100% payment after delivery and install of the requested quantity, technical approval and submitting the financial documents.

 

How to apply

NB: This purchase is made for emergency situations

 

Date of delivery: One week after signing the agreement.

 

File must be submitted to [email protected]  before the 17th  of October 2024.

 

Questions / Request for clarification

Any requests for clarification may be submitted by email to   [email protected]

 

Timeframe and Payment: 100% payment after delivery and install of the requested quantity, technical approval and submitting the financial documents.

 

Expired
Deadline
Thursday, 17. Oct 2024
Type of Call
Call for Consultancies
Intervention Sector(s):
Infrastructure & Services Rehabilitation
Duration of Contract:
Detailed timeline per deliverable to be agreed upon with the consultant.