LOST announces a tender for the purchase of “construction tools & equipment” funded by BMZ.

Tender number: A 18/2020

1. General remarks and special condition: the offered tools & equipment must be in accordance to our specification, sound, fair and in merchantable quality.

  • The product must be available in regional stocks.
  • Part shipments are not allowed.

 

2. Specification / Quantity:

10  Roll of Nylon(width 4 meter and weight 45kg)/ 400 Pc of Formwork Spring clamps (Clips)/45 M of Tube (Tube11mm, tubing for formworks tie rods)/ 1 bag of Cone(11mm, tubing push-on cones)/ 90  Pc of Concrete pail/ 50 Pc of Shovel/ 50 Pc of mattock/20 Pc of Rake/ 15 Pc of broom/23  Pc of Wheel barrow/ 3 Pc of Hand plate compactor/12 Pc of Hammer(bollad hammer with 50cm length wooden stick)/12  Pc of Carpenter Pocket/ Hammer (Chinese Bollad hammer 2kg with 35cm length wooden stick)/12  Pc of Slip joint plier/ 5  Pc of Hacksaw for wood/ 15 Pc of Tape measure/ 5 Pc of Open reel measuring tape/ 1 pc of Wheel measuring device/ 10 Pc of Level tool/ 5  Roll of Leveling hose/ 13 Roll of Thread/ 4 Pc of Steel bar cutter/ 4 Pc of Manual bar bending machine/ 100 Pc of Clamp/ 3  Pc of Concrete vibrator/ 5  rolls of Electrical Cable/ 10 pc of Female electric plugs/ 10  pc of Male electric plugs/ 2  Pc of Electric Large Grinder/ 20  Pc of Disc for steel-cut/ 2  Pc of Electric Drill/ 10 pc of Drill bits for wood/ 10 pc of Drill bits for concrete/ 2  Pc of Electric generator/ 15   Pc of Float/ 1 Pc of Formwork spring clip clamp tensioner/ 5  Pc of Caulking gun.

 

3. Samples: samples are not required

4. Delivery condition: All items must be delivered to LOST warehouse in Baalbeck .

5. Delivery date: 21/09/2020 or before

6. Prices: All offered prices must be indicated in US Dollar only. All requested items must be priced. Quotations stated in other currencies will not be considered during the awarding process.  Prices must include transportation, Value added Tax (VAT).

7. Inspection, Acceptance and Rejection: LOST reserves the right to inspect and test through its representatives all Goods ordered under the Contract at any time and place. The Contractor, without additional charge, shall provide all facilities for inspection and all necessary support to ensure that inspections can be performed in such a manner as not to unduly delay delivery of the Goods.

LOST may reject any goods supplied under the Contract that do not meet the requirements of the Contract or apply a penalty for Goods not fully conforming to such requirements. Rejection of the Goods shall be made as soon as practicable after delivery of the Goods to their final destination.

Neither any inspection carried out by representatives of LOST nor any acceptance of the Goods or part thereof by LOST nor any omission by LOST to inspect, accept and/or reject the Goods or part thereof shall release Contractor from its responsibility for such Goods that are not in accordance with the requirements of the Contract, including warranties.

8. Ordering Party:

The Lebanese Organization of Studies and Training

Baalbeck – Ras Ein – lakkis BLD

+961 8 377075 – EXT.120

Requests for clarifications and questions should be sent by mail to: [email protected]

Max. 8/09/2020, before 12:00Pm.

How to apply

9. Conditions for submission:  only Suppliers that gots: 
Company license registration, commercial register, commercial broadcasting, certificate of registration with the Ministry of Finance and certificate of registration with Value added Tax (VAT), are allowed to participate in the tender.
10. Tender Documents:  technical and financial proposal will be shared on Daleel Madani. 
LOST request that the documents of the tender  (technical and financial) proposal  must be submitted by hand in closed, separated and sealed stamped envelopes, with the name of the bidder, telephone number, name and tender number attached to the Lebanese Organization for Studies and Training at its main branch in Baalbeck, Ras Al-Ain Street, Al-Lakis building, second floor- at the Secretariat's  office (secretarial).
 

11. Deadline for submitting tender documents:  Wednesday 9/09/2020 at 2:00 PM. Any bid submitted after the closing date of the tender will be rejected.

 

Bid Opening:  LOST will hold a tender opening session in the presence of bidders (if they wish to attend) On Thursday 10 /09/2020, at 11:00 am, at LOST Office at Lakkis Building 2nd floor, Ras El Ein Street, Baalbek-Lebanon.

 

11. Payment method: Payments will be made in USD (Fresh Money – cash dollars) through banking channels to the company's account, within 1 month after receiving the original commercial invoice and the delivery note, based on the agreed terms and conditions.

 

12. Selection of Tender:  LOST will select the lowest price offer that matches the required specifications after calculating the technical evaluation percentage (10 points).

 

Expired
Deadline
Wednesday, 09. Sep 2020
Type of Call
Calls for Tenders
Intervention Sector(s):
Agriculture
randomness