Call for Bidding / Medical equipment: Anesthesia Machine, Ceiling lamp, Orthopedic operation table
Anesthesia Machine
- Delivering anesthesia Agents to Patient during Surgery Procedures
- Monitoring system of ECG, EtCO2, Pulse Oximeter and airway pressure, NIBP, and skin Temperature (2 options are needed: build in monitor or separate monitor)
- Anesthesia Gas monitoring system O2, N2O, and Compressed Air
- Scavenger System
- Isoflurane Vaporizer and Sevoflurane Vaporizer
- Provision for delivery of oxygen, nitrous oxide and medical air with pressure gauges
- Audio-visual oxygen Failure Warning System with Nitrous oxide cut off
- Flowmeter Oxygen, Flowmeter Nitrous Oxide, and Flowmeter Compressed Medical Air
- Top Shelf to keep monitors and a Tabletop with Drawers to keep anesthetic drugs, equipment etc.
- Durable , moisture resistant and antistatic Wheels with Brakes
- The Anesthesia machine frame shall be made of rust proof material/Stainless steel or sheet Steel protected with Epoxy-Paint
- Adjustable pressure limiting Valve, breathing circuit pressure measuring device
- Bag/Ventilator selecting Valve integrated onto the Absorber
- Easily attach oxygen sensor
- CO2 absorbent Chamber Canister (Soda Lime)
- Supplied with adult and pediatric Bellows
- Can operate for Adult and Pediatrics
- Ability to set Tidal Volume, Respiratory rate and I:E ratio Ventilator should have audible alarms for ventilator failure, low oxygen supply Pressure, inadequate volume delivery, disconnection alarm, and power supply failure
- Hose assembly for piped Oxygen supply (2 Sets), Hose assembly for piped Nitrous Oxide supply (2 Sets), and Hose assembly for piped Air supply (2 Sets)
- Power supply 220 Volt, 50 Hz
- Backup Battery (for about 3 hours)
- CE, FDA approved
Ceiling Light
- Operating LED Light
- Ceiling Mounted
- Two Heads, 160,000 Lux each
- Lifespan of LEDs more than 50,000 Hours
- Color Temperature: 4.500 Degree Kelvin
- Dimming Range: 50 – 100 %
- Mechanical Adjustable Focus
- Total Power Consumption to be less than 50 Watts
- Room Dimensions: 6.45 m * 5.45 m * 3.05 m
Operating Table
- carrying out treatments, dressing interventions and operations of general surgery and traumatology
- Orthopedic Table
- All exposed metallic parts shall be made from stainless, acid proof steel
- Table base shall be mobile and shall have central brakes Back
- Rest and leg rest inclination angle, kidney elevator, Trendelenburg and reverse-Trendelenburg positions and height adjustment of the table top shall be activated by electro hydraulic system
- Table top shall be translucent for x-rays
- Table top length approximately 2000 mm
- Table top width approximately 600mm
- Minimal height of the table 750mm
- Maximal height of the table 1100mm indicatively
- Trendelenburg at least 25
- Reverse Trendelenburg at least 25º
- Lateral tilt at least 18º
- Back rest inclination angle at least +55º to -25º
- Head rest inclination angle at least 45º up
- Head rest inclination angle at least 20º down
- Power requirements 220 Volts, 50Hz
Accessories
- Body restraint Strap with clamp : 1
- Padded Shoulder supports : 2
- Padded Leg support with swivel type clamp : 2
- Padded arm Rests 450 -500 mm long with two arm Clamps : 2
- Padded Lateral support with universal attachment Clamp : 2
- Padded rubber mattresses with Anti-Microbial agent incorporated into all components that assists in Prohibiting growth of bacteria & fungi and easy to clean and maintain and of at least of 1” thickness : 2
- I.V drip Stands attachable to the table
- Environmental factors: capable of being stored in ambient temperature of 0 – 50 degree C and relative humidity of 15 - 90% The unit shall be capable of operating continuously in ambient temperature of 10 -40 degree C and relative humidity of 15-90%
- CE and FDA Approved
How to apply
Interested companies are invited to apply for this tender and submit their quotations in two sealed and stamped envelops: One envelop for technical information and the other envelop for price information.
Conditions for interested companies:
- Ability to enter the camp for delivery, installation, training and preventive maintenance.
- Warranty period: not less than 24 months from installation
- Preventive maintenance schedule to be set in advance
- Delivery Date: End of May 2019
Interested companies must deposit the envelops by person on the following address:
Tender box, accounting office, Human Call Buiding (Al-Nidaa Hospital), Upper Street, Ein El-Hilweh camp, Saida, Lebanon.
Deadline for submission is: 12pm, Thursday 28th of February 2019
Contact person:
Mustafa Abou Atieh
Executive Director
Mobile+WhatsApp: 0096170115524
email: [email protected]
منتهية الصلاحية